In my early teen years, during the 1980's, music became a large part of my life after my father
purchased a guitar for me.
In addition to just playing guitar, I loved to record my own music.
My first recordings were made on a cheap multi-track recorder
that my father owned, they were horrible.
As I started playing in bands and developing my guitar playing skills, I continued to do my own recordings.
I was always interrupting practice to set up or check cassette recorders.
In the early 1990's I purchased my first multi-track recorder, it was a Fostex X-26.
In early 1998 I purchased a computer and within a month or two I owned my first
Digital Audio Workstation (D.A.W.), Samplitude Studio version 4.04a.
Over the next few years I faithfully upgraded the software, keeping current with new digital recording
technology.
Starting in late 1998 I began recording small projects for friends and their bands. The work mostly
consisted of taking their cassette recordings and loading them into Samplitude, cleaning them up,
and burning them to CD. Shortly thereafter I did my first multi-track recording project for a friend's
band. Although it didn't come out as planned, I felt good about taking on
larger multi-track recording projects.
I have mastered projects for several bands and my work received positive
feedback on a local radio station that featured one
band who's CD I mastered.
When it came to my own band, I always recorded my rehearsals and jam sessions.
'Room 1' Recording Session Pictures ...the band members
My largest multi-track project was for a local band called "Room 1". In early 1999 I
started recording their 12 song CD. Every instrument had it's own track. I put all my
years of recording experience into the project and I always received positive feedback
from the band about the quality.
'Room 1' Recording Session Picture
O'KEEFE ARTS RECORDING STUDIO
The main part of the studio is approximately 15' x 18'. The floor is completely carpeted
which deadens much of the echo and reverberation and there is a large sofa at one
end of the room.
A small 5' x 6' alcove off one wall is where the outboard and recording gear is located.
The control room is not isolated from the main recording area as you can see.
The studio is underground and surrounded by concrete walls and no windows. Many
layers of sound proofing have been applied to block out noise coming from the area above
the studio. The studio is very sound isolated from the outside world.